Pool Pump Essentials – Great Savings With Proper Selection And Maintenance

pool pump

Image via Wikipedia

Filling the swimming pool with water is not the be-all and end-all of it. It requires maintenance just like any other investment. Having an efficient pool pump is one of the most important tools of swimming pool maintenance because it helps keep the water clean and crystal clear. A stagnant pool leads to the growth of algae and will turn your pool water green. This is the reason why choosing the right size and kind of pump for your pool is important as it can make a big difference in your energy consumption. A pool pump circulates and filters the water to keep it clean and moving. They vary in size and power.

Things To Consider When Choosing A Pool Pump

1. Pool Size

Water in the pool needs to be circulated every four to six hours or at least once or twice a day. Only a large portion of this water will be circulated and not all the water. To figure out the flow rate, the owner must decide how often they want the water to fully circulate. Having this knowledge allows the owner to calculate the pool’s flow rate.

2. Pump Power

Choosing the power of your pool pump is crucial as it could create damage instead of savings. A pump that is too powerful could prevent proper filtration from occurring and can even damage the swimming pool filter and heater. Also, a high-powered pump installed in the wrong swimming pool can blow pipes or fittings apart. It is therefore important to choose the pool pump that is appropriate for the size of your pool.

3. Pump Size

A pump that is too large for your pool size can result in damage to the plumbing and equipment. It could also result in cavitation. Cavitation is the formation of bubbles caused by the impeller when the water is intensely vibrated. As these bubbles pop, shock waves are created and may burst with enough force which can damage the impeller and other pump parts. This occurs when the pool pump is too large for the suction side of the recirculation system and when there is an excessively long suction line. An oversized pump can also create excessive flow, which can result to the erosion of the system’s piping.

4. Pool Features

When buying pool pumps, it is always advisable to select the pump with the right horsepower. The horsepower and head flow of the pump should match with the features of the pool. Residential pools need a pump with an average horsepower.

5. Space

Before purchasing a swimming pool pump, the space surrounding the pool should also be considered. For instance, an indoor swimming pool will no doubt have limited space around it; hence it is ideal to buy a small or medium-sized pool pump while an outdoor pool will pose no problems for a large-sized pump.

6. Speed

Depending on what is needed, the pool pump can be adjusted to run at different speeds. For instance, running a manual pool vacuum may require more power than merely circulating the water. Looking into the option of using a pool pump with variable-speed may help you save energy and cut costs on pool maintenance.

How To Keep Your Pool Pump In Tip Top Shape

Along with maintenance of your swimming pool, it is equally essential that you care about the maintenance of swimming tools such as your pool pump and filters. After all, these tools are designed to keep your pool in tip top shape. If these tools are not maintained themselves, how can you expect to keep the pool in top shape, too?

Proper care and maintenance of the pool pump shall make it last for a very long time. A few of the basic maintenance routines are:

Check the pump at least once every week.

Since you are dealing with electrically powered equipment, you need to be very careful while you check it. Check the valves and seals. A torn seal should be replaced or repaired right away.

Pool pumps should never be turned in without the presence of water in it. To check if the pump is working properly, check the pressure gauge reading after turning it on. If the reading is around 30 to 35 PSI, check if all the valves are appropriately open. If you find it difficult to get your pump primed, clean the dirt away from the vents and cooling fans then go through the manufacturer’s manual for troubleshooting steps.

Unlike other machines, pool pumps do not require lubrication. On the contrary, lubrication may harm the rubber seals when debris is caught and sticks to the lubricant. Just lubricate the O-rings in the pump lid. A little noise is absolutely normal but if it makes too much noise, chances are that the bearings are worn off. Whining sounds indicate that pool pump has developed leaks and bearings or the gasket may have to be replaced or repaired.

Choosing the right pool pump for your pool will not only save you money but will prolong the life of your pool pump as well. So, take great care of your pump and it will take care of your pool.

Enhanced by Zemanta
Related Posts Plugin for WordPress, Blogger...

Speak Your Mind