Comparing Inground and Above Ground Pool Filters

above ground pool filters

Image via Wikipedia

Inground or Above Ground Pools Filters? You Choose

Installing and maintaining a swimming pool can cost you an arm and a leg. There are many factors that can add to the cost. One such factor is the type of pool. One important consideration when deciding on the type of pool to install, whether above ground or inground, is the type of pool filter to be used. This is because the type of pool filter chosen can have a significant impact on the cost of installation and the cost of maintenance. You must realize that inground and above ground pool filters vary in the way they are installed and where they are installed, and they differ in capacities. Read on to help you decide on the type of pool to build that best suits your requirements.

Differences Between Inground and Above Ground Pool Filters

Location of Pump and Motor. While the motor for inground pool filter can be over one hundred feet away, the pump and motor of an above ground filter is directly at the water level.

Plumbing. Another distinction between inground and above ground filters is that the former is usually stationed right next to the swimming pools, whereas inground pool filters would need a few feet of piping, skimmers and more suction lines. That explains why inground pools are typically more costly to install than above ground pools.

Length of Hoses. An above ground pool requires approximately 12 feet of hose. In contrast, an inground pool may necessitate as long as 80 feet. Again, this adds to the costliness of an inground pool.

Capacity to Filter Water. Above ground pool filters have the capacity to filter water as much as 15,000 galloons. In comparison, inground pool filters can accommodate as much as 40,000 gallons, making it more efficient.

Conveying Time of Water. It requires more time for water to reach an inground pool than an above ground pool. This means increased water and electricity consumption for inground pool.

Above ground filters differ from inground filters in the way and location they are installed, their capacities to filter water, and their respective amount of water and power consumption. All these translate to variance in the cost of installing and maintaining a swimming pool.

Enhanced by Zemanta
Related Posts Plugin for WordPress, Blogger...

Speak Your Mind

*